Direct Synthesis of Adipic Esters and Adiponitrile via Photoassisted Cobalt-Catalyzed Alkene Hydrodimerization

The direct hydrodimerization of acrylates and acrylonitrile offers a general streamlined access to industrially important intermediates to nylon 6,6. However, a practical catalytic method for this process has thus far underdeveloped owing to the challenges in regioselectivity and environmental compatibility of applied reagents. Here, we report a cobalt-catalyzed tail-to-tail hydrodimerization of activated alkenes driven by a visible-light photoredox catalysis at ambient temperature, which is applicable to both adipates and adiponitrile synthesis from potentially renewable feedstocks. This protocol utilizes half equivalent of hantzsch ester as a recyclable two-electron and two-proton donor with the assistance of catalytic amount of base as a proton shuttle, and has been shown to be highly regioselective and efficient for hydrodimerizing various activated alkenes to 1,4-difunctionalized butane derivatives.     

Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.     

Excellent UV-absorbing cotton fabric with high durability and hydrophobicity based on surface-initiated ATRP of polymerizable organic UV-absorber

Cellulose - Ultraviolet (UV) protective cotton fabric is a convenient and reliable way to protect human body from sunlight. Herein, a polymerizable UV-absorber,...     

白云石制备似立方体状方解石型碳酸钙晶体及其机理研究

以轻烧白云石粉、氯化铵和二氧化碳为原料,在未使用晶型控制剂的情况下,通过蒸氨-沉钙过程制备出了似立方体状碳酸钙。研究了反应温度、溶液中钙离子浓度、通气速率、搅拌速度以及陈化时间对碳酸钙中方解石相含量以及晶体形貌的影响,并探索了沉钙反应的晶型控制机理。结果表明,在反应温度40 ℃、钙离子浓度0.05 mol/L、通碳速率100 mL/min、搅拌速度400 r/min和陈化时间2 h的条件下,制备出形貌规整、粒径分布均匀的似立方体状碳酸钙,平均粒径为5~10 μm。该研究为提升白云石的使用价值、生产高附加价值的碳酸钙产品,以及提高白云石资源的利用率提供理论基础。     

自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

Graphene Saturable Absorber Mirror for Mode-Locked Orange Pulse Laser

Journal of Russian Laser Research - We demonstrate a passively-mode-locked Pr3+: LuLiF4 laser operated at the 604 nm orange wave-length, using monolayer graphene as a saturable absorber. The...     

An Analysis of Vibrations and Rotations in the First Hydrogen Sulfide Hexade: the 4ν2 H $$_{2}^{{32}}$$ S Band

Optics and Spectroscopy - The infrared spectrum of the H2S molecule is recorded using a Bruker IFS 125HR Fourier transform spectrometer and studied in the range of 4500–5000 cm–1, in...     

Bidirectional and Unidirectional Negative Differential Thermal Resistance Effect in a Modified Lorentz Gas Model

Recently,the negative differential thermal resistance effect was discovered in a homojunction made of a negative thermal expansion material,which is very promising for realizing macroscopic thermal transistors.Similar to the Monte Carlo phonon simulation to deal with grain boundaries,we introduce positive temperature-dependent interface thermal resistance in the modified Lorentz gas model and find negative differential thermal resistance effect.In the homojunction,we reproduce a pair of equivalent negative differential thermal resistance effects in different temperature gradient directions.In the heterojunction,we realize the unidirectional negative differential thermal resistance effect,and it is accompanied by the super thermal rectification effect.Using this new way to achieve high-performance thermal devices is a new direction,and will provide extensive reference and guidance for designing thermal devices.     

Derived dimension via τ-tilting theory

Czechoslovak Mathematical Journal - Comparing the bounded derived categories of an algebra and of the endomorphism algebra of a given support τ-tilting module, we find a relation between the...